ExtremeSwitching (EXOS/Switch Engine) - Page 790 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Is summit x440-48p-10G stackable via SFP+ ? if yes, How?

i have 2 summit x440-48p-10G here without stacking modules, i saw that to enable stacking in xOS you just need to enter "enable stack" but this command is not present in the switch with version 15.1.3.4, is x440 stackable?

Summit x440 stacked switches: change in VLAN tag and port assignment command cannot be excuted.

I need to change the vlan ID for our management for the stacked switch, but when i enter the command for the change, the "backup" wont accept the change, same with changing the vlan tag for the ports.

The algorithm of ECMP

What is the algorithm of ECMP on XOS. Is it platform independent?

Howto: ipv6 Router Advertisement Option DNS Server

Has anybody realized a working ipv6 config in EXOS 15.1 with router advertisement for DNS Server? (RFC 6106) I tried: configure vlan NAME router-discovery ipv6 ... but there is no further option. conf vlan dhcp ... acceptes only IPv4 Adresses as...

LLC/SNAP encapsulation and L3

Does x480 support LLC/SNAP encapsulation on layer 3? To be precise i'm not getting NDP response on sending LLC/SNAP encapsulated packets. I know about the VLAN protocol filtering but that is just L2 related. Any reference to this would be great. T...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN