I have a query regarding Link Fault Signal Function. What determines a local/remote fault on a port when it goes down. Am I to assume that a local fault means the switch caused the port to go down and a remote fault, the client caused the port to ...
Create Date: May 15 2013 5:19PM Hello all, I've got 2 x460-48t switches both with the XGM3SB-4SF module plugged into Slot B. I am trying to connect these switches together via one of those 10G ports and use the other 3 ports for server connection...
Hi, new Extreme switches have a lot of RAM. Now we can download xsf scripts to the flash, but it is possible to use linux tmpfs -> /dev/shm (for example 20 MB) This could be useful when you need to download some dynamic scripts. Is it possibl...
We are doing Port Aggregation between two Black Diamonds ( 4 Ports ) , but we found that only one ports is taking max traffic and even dropping packets in peak hours . Rest of the ports in LAG barely taking some traffic . enable sharing 9:23 groupi...
How do I copy a config file from a Summit x460 to usb flash? When I run a cp (copy) command it doesn't give an error (cp primary.cfg memorycard extremepri.cfg), but when I try to do an ls memorycard, it says the usb drive isn't mounted and when I put...
