ExtremeSwitching (EXOS/Switch Engine) - Page 811 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

clear flow and egress counters

Create Date: Jun 5 2012 10:31AM Hi I have bd8810, 12.5.4.5, MSM-48c, "C" cards. I configured clear flow with ingress counters on ports to notice some peak or bursts on ports. All works ok on ingress but on egrees doesn't. There are acl with counte...

How to configure IP-phone servival with 802.1x

Create Date: Jul 13 2012 3:03AM Hi,I have an extreme switch summit 450 with summitX-12.5.4.5.xos.On it, I have configured 802.1x with radius and authentication on mac.An IP-phone (Cisco or Avaya) is connect to switch and authenticated with mac.When...

MLAG with 4 Switches

Create Date: May 31 2012 5:09AM Hi, We have 4 x450 switches and we are trying to use MLAG. Stacking is not an option because we had many problems previously with stacking therefore we want to use MLAG in our topology. https:// Is it possible ...

Sample Qos Config

Create Date: Jun 7 2012 10:02AM Hi, Would it be possible if anyone could provide a sample config (or a list of things to configure) for a setup of QoS, on our Summit switches, that will use CISCO phones. We have created a vlan for VOIP and would l...

bypass netlogin for some VLANs

Create Date: May 10 2012 7:17AM A port of an Extreme is configured with netlogin and mac-based-vlans. There are a number of (tagged) VLANs defined on this port. Now I want to bypass the netlogin authentication for devices on a specific VLAN. Is thi...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN