ExtremeSwitching (EXOS/Switch Engine) - Page 812 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

specify source interface for telnet, tftp, snmp, syslog etc?

Create Date: Oct 17 2013 1:07PM Is there anyway to specify a source interface when tftp copying images or configurations? On some customer networks they have 'invisible' IP transit networks that aren't reachable and some of these happen to be on t...

Multicast Issue: Erro:Kern.IPv4Mc.Error

Create Date: Oct 11 2013 5:20PM I am new to the Extreme networking world and am seeing some issues with multicasting Here is the error I am seeing in the logs Slot-3: Unable to Add IPmc vlan 8 for 3:23 s,G=ac106812,effffffa IPMC 0, unit 0 No res...

error on egress (dynamic) acl

Create Date: Sep 27 2013 9:57AM I want to block traffic from vlan1 to vlan2 setup acl: create access-list deny-v1-v2 "source-address 10.99.36.0/24;destination-address 10.99.35.0/24" "deny" config access-list add deny-v1-v2 first any egress apply...

Replacing a failed Summit X450 in a stack

Create Date: Sep 3 2013 5:28PM Just hoping I could get a pointed in the correct direction. I have about 20 closets with mostly x450's in virtual stacks. For the most part they have been stable and running without issues. We have had to add addi...

Image upgrade

Create Date: Nov 4 2013 5:15PM Right now I am running version 12.0.3.16 on switch X250e-24p. Is it ok to upgrade to version 15.3.2.11? Will it work or not? On hardware/software reference for switch, it only shows minimum version. (from Keshab...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN