ExtremeSwitching (EXOS/Switch Engine) - Page 832 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Port Locked on authvlan

Create Date: Mar 25 2013 1:17PM Hello, i had a big trouble in my network. i have a stack with 8 summitstack 450e with netlogin configuration shown as below: # # Module netLogin configuration. # configure netlogin vlan authvlan enable netlogin dot...

anomaly-protection configuration issue

Create Date: Apr 2 2013 2:26PM For some time, at the edge of our network (or where we aggregate if we don't have Extreme at the edge) we've been running anomaly-protection, minus the l4port component (it tends to interfere with VoIP phones and pri...

Stacking x670 with x460

Create Date: Apr 3 2013 7:51PM Trying to stack 2 x670 with the VIM4-40G4X with 2 x460's with the v80 stacking modules. When I try configure stacking between them I get two separate stacks, one for the x670's and one for the x460's. Using 2 stacki...

Hopefully simple: Setting up a trunk on a combo port

Create Date: Mar 13 2013 6:06PM Hi everyone, I have a Summit x440-24p in front of me, and it's my first config I'm doing from scratch. Basically what I've done is set up a few VLANs on my core switch, and set them up on this switch as well. I have...

Specific VLAN routing question

Create Date: Mar 28 2013 10:05PM Hi, I am working with three BD8800 switches, connected via 10Gb fibre links. Right now, the network is designed so that all traffic from switch 1 passes through switch 2, and then upstairs to switch 3, to a file ser...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN