ExtremeSwitching (EXOS/Switch Engine) - Page 837 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme Discovery Protocol (EDP) - Network Audit

Create Date: Mar 7 2013 12:41AM Hello, By default, the EDP was enable on the Extreme switch ports. According to network audit, the EDP must be disable on all the interfaces. My concerns are: 1) I am deployed Ridgeline for the network management...

access-list IPv6 ?

Create Date: Mar 12 2013 10:21AM Hello, is there anyone that have created an IPv6 policy based on source address applied to an access-profile? I'm tryng to do this on a X450e-24t 12.5.4.5 patch1-6 thank you (from kunde)

Need help : Port 80 is not closed.

Create Date: Mar 13 2013 3:06AM Hi everyone, I have a Extreme Summit x450A.. I was trying to disable the http web access to the switch since I am using https to access to the switch. However, after I issued "disable web http" command, save config...

How do I configure ingress and egress rate-limiting traffic?

Create Date: Mar 3 2013 10:00AM I found this solution and I believe it is worth sharing: How to set the rate-limit on egress and ingress port? Platform: Summit X450, X450a, and X450e, X460, X650, X440, X670, X350, X150, X480 and most BD8k platform...

Fix on howto increase the number of IPv6 (BGP) route entries in HW LPM

Create Date: Mar 10 2013 1:44PM Hi, As some of you may have seen, the current IPv6 BGP Tablesize is growing quickly currently. That might give messages in your LOG on the switch stating that it can't download a route into HW LPM. ( HW LPM table...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN