ExtremeSwitching (EXOS/Switch Engine) - Page 850 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

TO Stack or not to Stack that is the question?

Create Date: Sep 12 2012 7:55AM Hi We have two x670's as our core with x460 / x440 as edge switches, I'm wondering whether to stack the x670's or to link them via uplink ports. the reason i ask. is yesterday we tested a link failure between the tw...

Serious problem for snmp and ipv6

Create Date: Sep 7 2012 5:08AM Today i use summit x250 and 450 series switch and test get snmp infomation through IPv6,found if firmware was 12.x.x.x it w you will getill ok but when use version 15.x.x.x that switch will be reboot,so if you use 15...

'Summit X450e' Admin account password forgot :(

Create Date: Sep 17 2012 6:33AM Hi All, We installed one Extreme Network's 'Summit X450e-48p' switch in our organization. Unfortunately, we forgot it's admin account password and we don't have any other account on this switch to work on it. Anybo...

Version 15.2.1 Router Advertisement problem

Create Date: Sep 5 2012 11:08PM when I upgrade to 15.2.1.5 version, the RA can't not give the gateway infomation to my host.................. (from Hsu_LiPing)

MLAG with 2 X650 to 1 Juniper MX5

Create Date: Sep 12 2012 11:59PM Hi, Has anyone had any experience with setting up MLAG between 2 Extreme X650 and 1 Juniper MX5. So interface ge-1/0/8 and ge-1/0/9 on the MX5 connect into port 1 on X650 switch A (core1) and port 2 on X650 switch...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN