ExtremeSwitching (EXOS/Switch Engine) - Page 87 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

X440-G2 Switch Factory reset

Hello guysI'm trying to set the X440-G2 to factory settings. I have done the following command in bootrom, but can not login with admin and no password. BootRom > config none BootRom > boot Can you please helpThanksMohammad

Migration from Extreme EXOS to Catalyst 9000

Hello community!Does anyone know if there is a tool to convert from an EXOS Switches to Cisco Catalyst 9000Or has anyone ever done this conversion? Thanks

EXOS FA ZTP

Hi, I am deploying several x440G2 switches with fabric attach. Is there a way to gain access to the switches with ZTP like in the ERS? In the ERS I have FA server configured with mgmt VLAN/i-sid and DHCP, so when the switch come up it receives the ...

Resolved! Extreme Summit x650-24x

Hello.There is some misunderstanding about how this equipment works. On other hardware in all the client vlans, I can see the MAC address of this Extreme Summit X650-24x. This should not be the case, or is it a normal situation when the MAC address o...

mpls rsvp-te path calculation

Hi,I have a problem with path calculation (maybe this is how it works, but i thought that is smarter): there is 3 links from R3 to R2, one of them (via R4) have include loose ero /32 (primary path), next have exclude same ero ip. secondary path can b...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN