Hi, I have two switches that will not become OSPF neighbours. They are setup as follows:Stack 1 needs to form an OSPF relationship with Unit 2. Stack 1 is running ExtremeXOS version 31.7.1.4Unit 2 is running ExtremeXOS version 16.2.5.4Everything abou...
I built a new MLAG pair of 5520-48W's recently, and when I created the ISC link, I wanted to use the QSFP+ ports, but the 5520's would not let me. In the end I got it working by disabling stacking support on the switches. It was fine because they wer...
I am building a stack of the following:Summit X670G2-48x-4qSummit X460-G2-48p-10GESummit X460-G2-48p-10GEThe plan was to re-use these 3 units, because they were originally deployed for a different purpose. The two X460's have Advanced Edge licenses....
I have a problem. I've got an X460-48p which I am doing a port mirror session on, aiming to capture some DHCP traffic to troubleshoot an issue. I am aiming to capture traffic between a source PC and a destination DHCP server. I have set the mirror co...
If I have multiple IP helpers on an Extreme EXOS switch, does it matter what order the IP helpers are added in, or does EXOS send the request, one-by-one, to ALL the IP helper servers configured one-by-one?
Hi Chris, I am not referring to Native stacking here sorry, I should have explained. I know that the X670-G2 actually supports 4 different methods of stacking: SummitStack-V, SummitStack-V80, SummitStack-V160, and SummitStack-V320. The X460-G2 suppor...
We don't need the Core features on the X670-G2's. So if I set the effective stack-license to Advanced Edge, does that mean that I can allow the X670'G2 to become master and still allow the other two X460'G2's to still become master capable without is...
The ID number needs to match across both MLAG peers, so whatever you configure the ID number as one the one switch, you need to configure the same ID number on the other side for the ports on the other switch you want to bind together.