ExtremeSwitching (EXOS/Switch Engine) - Page 95 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Simple Question About Port Numbering on the X460G2-48p-10G4

Looking at the front of the X460G2-48p-10G4's you can see they have: 48 x 10/100/1000BASE-T PoE-Plus 4 x 10GBASE-X SFP+ (unpopulated ports) This makes for a total of 52 ports that I would expect to see on the CLI. But oddly, when I issue a show po...

HTTP(s) server listening in all VRs once enabled

Hello,We use several public routing instances (VRs) on our L3 switches.The http(s) server is enabled in order to be able to monitor the switch, as some things like transceiver power are not available using SNMP.Now it looks like all that I can do is ...

EXOS Multicasting Support

Hi Fellows,I have below questions and need your expert advise specially for X695 & X670-G2:1. Can EXOS switches route multicast traffic using PIM upon GRE L3?2. Can EXOS switches load share GRE-encapsulated packets via ECMP?3. Whether EXOS switches c...

Problem with switch x670-G2

Hi What are thinking about this log infomation. I'am not found any information on the web. My action: I'am add vpls peer, vlan and save config and he crushed Soft 31.4.1.5. Switch shutdown all port and no ping. No access via console rs-232 because s...

AAA on Extreme

Hello,I would like to configure Authentication\Authorization on my Extreme Switch (Summit X440-48P) through AAA Server (Cisco ACS).I Have added tacacs configuration and authentication works fine. But I would like to configure: if the AAA is not acces...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN