We have some switch brands in our network and work with MPLS. We have problem to work with redundance when have Huawei or Datacom switches connect in EXTREME switches.Traffic source from Huawei or Datacom doesn't forwarding to alternative route by Ex...
Is this possible configuration. Same port 1,3,5 mirror to two different monitor ports "mirror_one" and "mirror_two" ?create mirror "mirror_one"configure mirror mirror_one to 10enable mirror mirror_oneconfigure mirror mirror_one add port 1 ingress-and...
Hello, colleagues!X590 stack was with 22.6.1.4.Issues began when tryed to upgrade stack directly to 30.7.2.1"Installing to Slot-2(Backup): .....Error: Failed to install image on Slot-2 - tar: corrupted data"Normally upgraded to 30.2.2.17, but again i...
Hello,I'm trying to configure radius authentication in NAC and I'm getting this failure in Events. (Rejected management login to switch XX.XX.XX.XX, User: XXX, due to: pap: Cleartext password does not match "known good" password)I have followed this ...
I'm new here and starting to learn EXOS. I working on a simple set up/lab, 1 Extreme switch (GNS3 lab - EXOC VM 30.5.1) and two PCs (VLAN 10=172.16.10.2/24 & VLAN 20=172.16.20.2/20). All I'm trying to do is to have one PC ping the other. I have ena...
