can not telnet from one switch to an other!

[Sikander_Shah]

I can ping to my connected switch but can not telnet the switch.

* Extreme_Demo_Switch-3.4 # ping 192.168.10.16Ping(ICMP) 192.168.10.16: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 192.168.10.16: icmp_seq=0 ttl=64 time=2.243 ms
16 bytes from 192.168.10.16: icmp_seq=1 ttl=64 time=1.331 ms
16 bytes from 192.168.10.16: icmp_seq=2 ttl=64 time=1.590 ms
16 bytes from 192.168.10.16: icmp_seq=3 ttl=64 time=11 ms

--- 192.168.10.16 ping statistics ---
4 packets transmitted, 4 packets received, 0% loss
round-trip min/avg/max = 1/4/11 ms
* Extreme_Demo_Switch-3.4 # telnet 192.168.10.16
telnet: cannot connect to remote host (192.168.10.16): Network is unreachable
* Extreme_Demo_Switch-3.5 #

[Henrique]

By default, the switch will send telnet through VR-Mgmt (Mgmt port). If the telnet have to use VR-Default (all ports except Mgmt port) then you have to add VR-Default to the telnet command.

If you are using User-Created VRs (not VR-Default/VR-Mgmt) you have to add the to the telnet command as already mentioned before.

You can use show vlan command to check which VR is associated with which vlan.

Also, by default, ping is sent through VR-Default instead of VR-Mgmt.

[Abobakr_Osman]

thanks for explanation.
this is what i search for ,, thanks

[Alexandr_P]

VR and vlan - it's different things.

Thank you!

[Sikander_Shah]

I can telnet but I have created many vlans when i put vr vr-vlanblue it shows invalid.
Telnet can only be access by default and mgmt vlan..