ā03-02-2020 07:29 AM
Hi,
Some of our X440G2 switches show high temperatures (around 90Ā°C)
Fans seem to work. So when looking at CPU usage, Iāve noticed the HAL process has a max usage of 99,9% and a constant 20%.
After reading this article I was wondering if the bootROM on the device should get an upgrade.
Currently, IMG version is 22.7.1-2, bootROM is 1.0.1.8
Is it good practice to do the upgrade? Where can I obtain the file?
Maybe there are other ways I should try prior to upgrading?
Thanks!
Daniƫl
ā03-03-2020 08:51 AM
HAL usage could be high due to different reasons:
If you want further investigation this, please raise case in GTAC.
Nikolay
ā03-03-2020 08:38 AM
Iāve applied the ACL from
by running
configure access-list flooding.pol any
Unfortunately, HAL proces CPU usage is not affected.
ā03-02-2020 12:33 PM
Great, this I was looking for. Thanks
ā03-02-2020 10:33 AM
Link local multicast is the most often reason of the high CPU utilization by HAL.
Nikolay