ExtremeSwitching (EXOS/Switch Engine) - Page 460 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Flow redirect with ECMP

Hi, I have checked the doc. and so on... but didn't find answer to my question. Is it possible to do ECMP with flow-redirect ? Example I have config like bellow: - 2 default gatways with the same metric configure iproute add default 1.1.1.1 100 ...

Vlan tag in SFLOW datagrams ?

Hi all, Is the vlan tag is on the SFLOW datagram ? My collector does not seem to see the tag of my vlans. Thx a lot

I need know serial number the license in the switches extreme

Hello All, I have switches x450, x460, x670 and BD-8806 but i need know the serial number the license Installed actually in the switches. you know how to get this number for cli ? Thanks.

Extended support for RPS-500p: Correction to Hardware Installation Guide

Extreme Networks testing has verified that the RPS-500p redundant power supply can be used with all X440, X440-G2, and X450-G2 switches. You can disregard the statement in the ExtremeSwitching and Summit Switches: Hardware Installation Guide (pages 7...

Advertise default gateway by OSPF

I have 2 L3 switches in our netwerk. a x670G2 (16.1.2.14) and a x460 (16.1.2.14). Both switches are a vrrp set. Both switches are configured for OSPF. Now I see that the default route of the x670G2 is advertised by OSPF and the default route of the ...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN