cancel
Showing results for 
Search instead for 
Did you mean: 

ip forward-protocol from Enterasys syntax to Extreme

ip forward-protocol from Enterasys syntax to Extreme

Gradelain_Ngoun
New Contributor
Hello Guy,

how to translate these commands from Enterasys to Extreme 460?
i haven't found the right command and no port on this so far.
ip forward-protocol udp 2009
ip forward-protocol udp 3001

thanks in advance
4 REPLIES 4

Gradelain_Ngoun
New Contributor

Gradelain_Ngoun
New Contributor
thanks a lot. issue solved. regards

OscarK
Extreme Employee
UDP profiles should be used for that, assuming it is udp broadcasts to these ports.
https://gtacknowledge.extremenetworks.com/articles/Solution/UDP-broadcast-packets-are-dropped-by-EXO...

Gradelain_Ngoun
New Contributor
my goal is to allow some ports which are not allowed by Default...
following is already implemented:
""""
configure bootprelay add vr VR-Default
enable bootprelay ipv4 vlan
"""""
what is missing is to allow the relay over UDP port 2009 and 3001.
Any help is appreciated.

Thnaks
GTM-P2G8KFN