ExtremeSwitching (EXOS/Switch Engine) - Page 309 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Can we see route table changes in a log entry?, can't seem to get this to work

* IW-Cologix-Core-Switch.2 # sh log configuration filter "DefaultFilter" Log Filter Name: DefaultFilter I/ Severity E Component SubComponent Condition CEWNISVD - ----------- -----------...

MTBF for X690

Hi guys, I've tried to find the MTBF for X690 -48x-2q-4c, the documentation and link don't contain this specification https://www.extremenetworks.com/support/mean-time-between-failures/ Do you have this info? Is for an RFP and the minimum requir...

All unused SFP ports on X670G2-48x is showing local-fault on link state even though it has nothing in it

I have a X670G2-48x, I've been trying to add in an edge node via SFP_SR onto it and all the unused ports link state are saying local fault. They have never been used nor have had a vlan attached to them. This is only happening to the unused ports on ...

Default route on VLAN

Hi, I have an problem with my core switch, the core is 2 Summit 670 with EXOS 16.1.3.6 . On the core and peripheral we have many VLAN but when I try to configure an client with the sumimt's IP as default gw I'm able only to ping other VLAN client.. b...

Disable SNMP port-up-down for all access ports but not interswitch ports

For a while now my log files (and email) have been getting spammed with "Agent Interface Down on interface xxxx Port" alerts. These are just access ports and they are going up or down because a user turns off their computer or undocks their laptop or...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN