cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with configuring x670 port speed from 1gb & 10gb

Problem with configuring x670 port speed from 1gb & 10gb

kalmoh
New Contributor

Hi Guys,

 

I have a problem configuring x670 switch from 1gb to 10gb port configuration, steps1 and step2 worked but step3 i want the port 2:1 to reconfigure back to 10gb but i get the error mentioned below. Is there a way to reconfigure 2:1 port to 10gb or factory reset port 2:1 only?? 

 

Worked:

Step1: configure ports 2:1 auto off speed 10000 duplex full

Step2: configure ports 2:1 auto on speed 1000 duplex full

 

Not Working:

Step3: configure ports 2:1 auto off speed 10000 duplex full

Error: Auto negotiation off is not supported on port 2:1 at 10G speed

 

/Cheers

1 ACCEPTED SOLUTION
2 REPLIES 2

kalmoh
New Contributor

Hi Alex,

After removing the SFP i was able to re-configure the port.

Thankyou 

Cheers

 

GTM-P2G8KFN