Problem with configuring x670 port speed from 1gb & 10gb

[kalmoh]

Hi Guys,

I have a problem configuring x670 switch from 1gb to 10gb port configuration, steps1 and step2 worked but step3 i want the port 2:1 to reconfigure back to 10gb but i get the error mentioned below. Is there a way to reconfigure 2:1 port to 10gb or factory reset port 2:1 only?? 

Worked:

Step1: configure ports 2:1 auto off speed 10000 duplex full

Step2: configure ports 2:1 auto on speed 1000 duplex full

Not Working:

Step3: configure ports 2:1 auto off speed 10000 duplex full

Error: Auto negotiation off is not supported on port 2:1 at 10G speed

/Cheers

[kalmoh]

Hi Alex,

After removing the SFP i was able to re-configure the port.

Thankyou 

Cheers

[Alexandr_P · Accepted solution]

Hello!
 

Look here

https://extremeportal.force.com/ExtrArticleDetail?an=000077921&q=Auto%20negotiation%20off%20is%20not...

Thank you!