cancel
Showing results for 
Search instead for 
Did you mean: 

Slot-2 FAILED (1) Dual Master

Slot-2 FAILED (1) Dual Master

Alexandr_P
Valued Contributor
Hello!

I have 2 switches X460 in stack.
Slot 1 - priority 90
Slot 2 - priority 70
Soft 15.5.2.9 p1-5

After reboot slot 1, slot 2 became Master, slot 1 role NONE and MGMT LED is blincking amber.

In log I see messages like
Failed to send SNTP request to server
and
Slot-1: Slot-2 FAILED (1) Dual Master

POST go normal (see this through console)
Diagnostic pass normal.

Any ideas?

Thank you!
6 REPLIES 6

Leandro_Brito
Extreme Employee
Remember to add the debounce command after Exos upgrade.

The fix in this case, is the option to run this command.

Alexandr_P
Valued Contributor
Hi!

You mean this?
xos0059131 Debounce timer is not getting configured if stack ports reside indifferent units. Also, pre-emphasis configuration should be
rejected in alternate stacking mode.

Which resolved in EXOS 15.6.2?

Thank you!

Ian_Worms
New Contributor
Hi,

I had a similar issue and Extreme TAC requested that I upgrade to version summitX-15.5.3.4-patch1-5.xos. The Bug id the provided me was xos0059131. My issue was that slot 2 was failing.

I was using the 10GB ports for stacking, Alternatenative ports.

Upgrade my stack and all looks ok now.

GTM-P2G8KFN