01-28-2021 12:41 AM
I am really new to STP on Extreme switches but I am seeing this error fill the logs. They are connected up to core Cisco switches I believe using PVST+ between the switches.
01/27/2021 18:38:31.41 <Erro:STP.InBPDU.Drop> Port=10: No associated STP port for STP Domain tag 1 (Rate-limited)
01/27/2021 18:36:31.41 <Erro:STP.InBPDU.Drop> Previous message repeated 10 additional times in the last 108 second(s)
Solved! Go to Solution.
01-29-2021 12:15 AM
We decided to remove STP. Using ELRP instead on Default VLAN 1. Still getting BPUD error but not affecting anything so we decided to just do a log filter so the log wouldn’t overfill.
01-29-2021 12:15 AM
We decided to remove STP. Using ELRP instead on Default VLAN 1. Still getting BPUD error but not affecting anything so we decided to just do a log filter so the log wouldn’t overfill.
01-28-2021 06:08 PM
I believe on the Cisco it’s PVST+ as well
01-28-2021 12:51 PM
What STP mode is configured on the other switches on VLAN 1?
01-28-2021 12:50 AM
Here is some more info. I see s0 is the only one in 802.1D mode?
s0(enable), Tag=0001, Mode=802.1D, State=FORWARDING
s18(enable), Tag=0018, Mode=PVST+, State=FORWARDING
s20(enable), Tag=0020, Mode=PVST+, State=FORWARDING
s706(enable), Tag=0706, Mode=PVST+, State=FORWARDING
s708(enable), Tag=0708, Mode=PVST+, State=FORWARDING
s709(enable), Tag=0709, Mode=PVST+, State=FORWARDING
s720(enable), Tag=0720, Mode=PVST+, State=FORWARDING
s721(enable), Tag=0721, Mode=PVST+, State=FORWARDING
s723(enable), Tag=0723, Mode=PVST+, State=FORWARDING
s95(enable), Tag=0095, Mode=PVST+, State=FORWARDING
s96(enable), Tag=0096, Mode=PVST+, State=FORWARDING
s97(enable), Tag=0097, Mode=PVST+, State=FORWARDING
s999(enable), Tag=0999, Mode=PVST+, State=FORWARDING