ExtremeSwitching (EXOS/Switch Engine) - Page 497 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

UDP port for syslog in 16.x EXOS

Hello, everyone!I have 460-G2 switch with 16.2 EXOS.The problem is I can't configure syslog, using this article:https://extremeportal.force.com/ExtrArticleDetail?an=000074214Everything works fine in 15x EXOS, but not in 16.x. In 15x using the setting...

VLAN Rate limiting on Black Diamond X8

Hi community, we have BlackDiamond X8 Firmware Release 16.1.3.6 how best to configure rate limiting with max 5Gbps (10Gbps available) at a dedicated VLAN for Backup-Traffic ? Would you recommend to configure "meter" plus "acl" ingress to VLAN ? A...

Cacti / Summit v670 Switch, Bandwidth monitoring.

Does anyone one know if there are Cacti templates for summit v670? I want to monitor bandwidth on ports and vlans.

x450e-24p replacing x350-24t with mirror backup not joining network

Good day everyone, Here is the case. Yesterday a X350-24T of one of our clients started giving fan errors so while we process the RMA we deciced to replace it with a X450e-24P. What we did was blank the X450e, copy the config from the X350 and "tfpt...

What is the procedure to remove old policies from switches?

We have some switches that have old policies on them, and I would like to remove the policies from the switches. I just want to make sure that I follow the proper procedure to remove them completely. Any help would be greatly appreciated! Thanks, ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN