cancel
Showing results for 
Search instead for 
Did you mean: 

X435 fanspeed - SNMP OID

X435 fanspeed - SNMP OID

AntonS
Contributor II

Hello,

I have another question about X435:

The X435 switch reports incorrect fanspeed in SNMP OID .1.3.6.1.4.1.1916.1.1.1.9.1.4

extremeFanSpeed!@#.iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremeSystem.extremeSystemCommon.extremeFanStatusTable.extremeFanStatusEntry.extremeFanSpeed

I think the rpm is not measurable on X435, so the output of the SNMP OID “extremeFanSpeed” should be 0 or NA?

X435

AntonS_0-1664356703422.png

TST1-SW1.9 # show fans

 

Slot-1 FanTray information:

State:                  Operational

NumFan:                 1

TST1-SW1.10 #

 

X440-G2

AntonS_1-1664356703425.png

 

 

TST2-X440G2-5.7 # show fans

 

Slot-1 FanTray information:

State:                  Operational

NumFan:                 4

Fan-1:                  Operational at 2100 RPM

Fan-2:                  Operational at 2160 RPM

Fan-3:                  Operational at 2100 RPM

Fan-4:                  Operational at 2100 RPM

TST2-X440G2-5.8 #

5 REPLIES 5

AntonS
Contributor II

OK
I will open a GTAC Case

If possible, send me the case number in a message and I will see if I check in on it.

AntonS
Contributor II

Hy Chris,

Sorry, it is the 24port version (System Type: X435-24P-4S)

it has a fan, but the rpm is not measurable.

no rpm output in the cli. in snmp the number is huge

BR

Anton

CThompsonEXOS
Contributor III

What model is that x435? the 24p should have a fan:

 

CThompsonEXOS_0-1664368666358.png

Thanks,

Chris Thompson

GTM-P2G8KFN