Adding on X670G2 to an existing OSPF network

[JohanHendrikx]

The OSPF network is a X460-24t and two cisco routers. all configured in the same area.

The fimrware of the X460 and the X670 is 16.1.2.14.

But for some reason the X670 is not learning or distribute any route.

How can I troubleshoot this ?

[JohanHendrikx]

I don't use policies. OSPF config is very basic.

configure ospf routerid
enable ospf
enable ospf export static cost 2 type ase-type-1
configure ospf add vlan area 0.0.0.0

vlanx is not learned form the other neighbor and is not distibuted to the others

[Parthiban_V]

Hi Johan, If neighborship is established then MTU should not be the problem. What type of route is not getting installed ? Do you have any import policies configured ?

[JohanHendrikx]

Oscar, neighborship is established. The license is oke (core). MTU could be the issue.

I wil check this