*00:04:96:82:4d:0b 1 Active Master CA-
00:04:96:82:4c:fd 2 Active Master CA-
00:04:96:7e:29:97 7 Active Standby CA-
00:04:96:7e:29:91 8 Active Standby CA-
00:04:96:97:77:35 3 Active Backup CA-...
I tried to enable ports by cli with this command:
confi(if)#poe-shutdown
but the problem is that it didn't recognize me, so I look up for information but I didn't found something that could fix that problem... help me please
Hello Guys,
I am not able to enable auto negotiation on up link ports (SFP Ports) of Extreme 200 series switch. Auto negotiation is by default enabled on port 1 to 24 and I am able to disable also by manually setting the speed of these ports.
Prob...
I need to know how to configure the 200 series switches to automatically put Cisco phones, that are older and don't support LLDP, into the correct phone VLAN at bootup. Just setting voice vlan and/or the OUI-based auto-voip feature but it doesn't see...
Hello all,
As commented in other posts, the correct way to get the hardware type of an EXOS device using snmp, is with sysObjectID.
Doing that for X690, X770, X870, it always return:
:~$ snmpget -v2c -c public sparex690 1.3.6.1.2.1.1.2.0
.1.3.6.1....
