ExtremeSwitching (Other) - Page 10 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

ISW Port Configuration Assistance

Hello,I have an ISW that I'm not too familiar with that I'm trying to configure one port to tag some VLANs and to have one untagged. For example- 123 untagged then 456, 789 tagged.I can do this easily with my Summit switches, but I can't seem to crac...

X450G2 - Intrusion Reaction

Hello community,i am far from intermediate regarding Exos and i am searching for a way to block unknown devices with a little app i am currently writing for our office:This app identifies machines that are not known in the networkIf a machine is not ...

Managing QoS for voice traffic

I've put this in the general switching and routing section because I'm dealing with EOS, EXOS and VOSS. I want to apply QOS to voice packets. For our sins we use CUCM, but some users (whose phones are connected to an X440-G2) are hearing brief audio ...

vsp - ers

Dear all , I have 2 core switches in the stack (VSP-8404C) and all edge switch are connected directly to the core switch. edge switches models are (3650GTS-PWR+ , 3626GTS-PWR+ etc) everything is working when we off the core 2 , even if both switche...

ERROR: copy failed (code:0x9) on firmware copy

Hello.What does the following mean?I can see the data being transferred from XMC using tcpdump. 5520-24X-VOSS:1#copy 192.168.99.96:/firmware/images/5520.8.6.1.1.voss /intflash/5520.8.6.1.1.voss Device /intflash has 961110016 bytes of free ...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN