Hello community, im having an issue with DHCP, between a trunk from a matix N7 to a C3 switch over a FO link, using VLAN 1, 7, 10 and 11 Basically, everything works when tested directly in the N7. I can get an IP to any machine over DHCP on any VLA...
I have a BD8810 connected via MLAG (ports 5:1 & 6:1) to two upstream Summit 670Vs. Ports 47-48 are the bundled ISL links between the 670Vs. The 8810 has vlan 10 whose gateway is a VRRP setup on the 670Vs. My question is, is it OK to use the ISL po...
I have a switch BD8806, which shows the following errors. The firmware is version 15.4.1.3 v1541b3-patch1-9, what could be the problem ?
Hi, i have 08G20G4-48P Switches und will connect about 35 ipphones with PoE. In the datasheet i can read that the switches support 375W. Looking on the GUI the switch is using about 60W in total, but do only provide 24 devices. I have updatet the new...
