ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

S Series - "show vlan portinfo"

Can you tell me when will the "show vlan portinfo" command will be added to the S Series product line? This is a very useful command we use constantly on our SecureStack switches. Thanks, Mark.

NAC debugging at the edge

We did a lot of NAC installations at different customers in different markets with Enterasys, Cisco, HP, and Juniper edge devices. With that experience we have a big difference between this vendors in case of debugging and troubleshooting. On the Ent...

Trunking port

How do I create a trunk port on a extreme switch (X440)? The goal is to allow a PC to connect to the native vlan via a Cisco IP Phone while all VoIP traffic connects to the voice vlan. It is my experience that the IP phone and switch port needs to be...

Theo by New Contributor II
  • 9129 Views
  • 4 replies
  • 0 kudos

Routing between VRFs on S8?

The below configuration works on an N1 running 07.62.06.0004, but not on an S8 running 08.11.04.0006. By working, I mean the interface in vrf test2 can be pinged from the CLI in vrf test1 and vice versa. Does anyone know if the behaviour has ch...

Patrick_M by New Contributor II
  • 1547 Views
  • 6 replies
  • 0 kudos

VoIP video problem

We are putting out new Extreme switches (x460 and x440) into different buildings. We are running 15.3.2.111. We use cisco phones for our VoIP. We have models 8945 and 9951 which also provide video. They have worked great in our test building (whi...

bw447 by New Contributor III
  • 599 Views
  • 3 replies
  • 0 kudos
GTM-P2G8KFN