cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme 200 series dynamic vlan assignment with extreme control

Extreme 200 series dynamic vlan assignment with extreme control

Ahmed_101
New Contributor III

Hi all, 
Im trying to configure dynamic vlan assignment using extreme control for extreme 200 switch. 
what should nac return to the switch? i tried sending RFC 3580 to the switch but the client does not move to the required vlan. 
any help ? 
Thanks.

1 ACCEPTED SOLUTION

RobertD1
Contributor III

Reminded me of a problem I had with dynamically assigning VLANs on EXOS. Some useful advise given to me in this post: Solved: Re: RFC 3580 - VLAN ID and EXOS - Extreme Networks - 94957 especially the additional commands I had to add to allow it.

View solution in original post

2 REPLIES 2

RobertD1
Contributor III

Reminded me of a problem I had with dynamically assigning VLANs on EXOS. Some useful advise given to me in this post: Solved: Re: RFC 3580 - VLAN ID and EXOS - Extreme Networks - 94957 especially the additional commands I had to add to allow it.

Ahmed_101
New Contributor III

Thanks, i solved the problem and its working now but i have another question.
can we assign a port to more than one vlan? 
like i have a switch and there is APs connected to it i want to send the wifi management vlan as untagged and clients vlans as tagged to the port is this possible in extreme 200 switches ? 

GTM-P2G8KFN