3 weeks ago
Hi all,
Im trying to configure dynamic vlan assignment using extreme control for extreme 200 switch.
what should nac return to the switch? i tried sending RFC 3580 to the switch but the client does not move to the required vlan.
any help ?
Thanks.
Solved! Go to Solution.
3 weeks ago
Reminded me of a problem I had with dynamically assigning VLANs on EXOS. Some useful advise given to me in this post: Solved: Re: RFC 3580 - VLAN ID and EXOS - Extreme Networks - 94957 especially the additional commands I had to add to allow it.
3 weeks ago
Reminded me of a problem I had with dynamically assigning VLANs on EXOS. Some useful advise given to me in this post: Solved: Re: RFC 3580 - VLAN ID and EXOS - Extreme Networks - 94957 especially the additional commands I had to add to allow it.
3 weeks ago
Thanks, i solved the problem and its working now but i have another question.
can we assign a port to more than one vlan?
like i have a switch and there is APs connected to it i want to send the wifi management vlan as untagged and clients vlans as tagged to the port is this possible in extreme 200 switches ?