Hi, Just in the process of configuring a VSP8600 and wanted to use the Mgmt interface in order to attach the switch to the network to be able to configure it with interference of the general configuration affecting the network. The switch is currentl...
Greetings HUB Community, We have a VSP7024 which was configured prior to my involvement. It is behaving as a BCB in an SPBM environment connecting about 15 VSP 4850s in a hub/spoke configuration. System has been working flawlessly. We recently acquir...
I do have something urgent to ask, Any help would be great. In the diagram below I have two SBCs as shown, SBC HA1 Is live and HA2 is there for backup, and Yes the call recording server is not dual homed. I can mirror the traffic from port 1/31...
Hello, Since I upgraded my fabric to VOSS 8.1.0.0, I experience vlan flooding. I receive all traffic of a vlan on each ports belonging to the vlan. It’s the same behavior for every VSP 7200 an 8400 in the fabric in 8.1.0.0. Does anyone have the sam...
Hi I've several ERS5520 stacks and sometimes I get one of the switches restarted by itself. The status led is off on this unit too. When I checked the logs, I found that it is usually combined with the following Exception: C 3 2019-09-14 14:13:2...
