How to Use the boot loader Menu to Download and Install a New Image to an VOSS VSP Switch
How to Use the Boot Loader Menu to Download and Install a New Image to an VOSS VSP Switch?
Forum Posts
Resolved! How can I implement the fabric with 2 VSP BCB and 2 BEB with ZTP +?
I need to implement a fabric solution with 4 VSPs, 2 7400 switches such as BCB and the other 2 7400 switches such as BEB, in addition to integrating exos switches such as fabric attach in the site, is it possible to configure with ZTP +? as far as th...
Fabric, mac move, no ping
Hello! Below scheme: All works fine.BUT, when access switch (X590 #1) connect to VSP#2 ping between lap-tops is disappear and does not renew.Interesting that all ports are deleted from VLAN 1, but:VSP7K#2_LAB:1#sh vlan mac-address-entry mac 64:31:50:...
How does VSP8400 configure policy routing?
How does VSP8400 configure policy routing?
VSP-4000 port clocking up HCInFlowCtrlPkts
Hi, When graphing an up link port we are seeing HCInFlowCtrlPkts increasing can offer any advice why we are seeing this? The port is not very busy. It’s copper port running at 1Gb. Many thanks
