What's Wrong with my APs (AP3935i)

[Parker_Bickel]

Overnight we had some APs randomly start what looks like an LED Code and will no longer connect.  The Controller can’t find them and no matter what I connect them to they come up with this light code.  Some are connected to the same switch some different switches.  Some on the the switch are working some aren’t.  I even opened a new AP out of the box and it’s doing this.  Can’t find anything online about what the LEDs are trying to tell me.

[Ronald_Dvorak]

Fo rme that looks like that you’ve set the wrong baud rate.

And the AP doesn’t support telnet - you ‘d need to use ssh.

-Ron

[Brian_Anderson1]

Recently had a customer call and his aps just lost their mind on finding the controller.  They are on same subnet so multicast should have worked.  Ended up adding dns entry and APs came back online.  Just mentioning this, just in case there is a pattern forming here.  

[Parker_Bickel]

Not sure what the issue was, but if anyone else has this issue I solved it by completely deleting DHCP Scope Option 78 and rebuilding it.  The controller then found the APs and connected them.

[dcsdne]

I would contact GTAC.