ExtremeWireless (WiNG) - Page 309 - Extreme Networks

ExtremeWireless (WiNG)

Questions and discussions about WiNG devices

Forum Posts

Sorted by:

Start a conversation

Wing CLI question

We want to clear a bunch of overrides on a bunch of APs and their radios that was set. Is there a way to mass-clear overrides to prevent of from touching the config of each one individually? We're using Wing 5.8 on a vx9000 controller. Thanks for a...

PEAP failed SSL/TLS handshake because the client rejected the radius server certificate

Extreme ap6532 (wing 5.8) Ge1 interface configured as dot1xsupplicant (client) for wired 802.1x authentication of AccessPoint connected to cisco 2960x switch (15.2(4)E5) configured with cisco ISE 2.3 as radiusserver. During authentication of AP a rad...

Only see minimal radios on my new SSID

We created an additional WLAN with a unique SSID with different security than the rest of our WLANs. When I go to Statistics, RF Domain details, look at the radios status, it only shows a very small number of radios active. Why is that? We're using...

How to disable VLAN routing

Hi, I Created two VLAN and two SSID in AP 7522E.. That SSID name as First & Second. Vlan1 is 192.168.1.10 & Vlan2 is 192.168.2.10 series. SSID First is assigned to Vlan1, Second is assigned to Vlan2. Now i connected two system as two different SSID's...

NX5500E max AP supported in high availability mode (1+1)?

Hello everyone, Can a NX5500E controller be supported max to 1024 AP when it run in HA mode with second NX5500E on unique GUI to manage all AP? (like HA mode of Enterasys controllers) And the max of controller in Cluster to be supported in a system...

Top Kudoed Authors

User

Count

28

16

13

12

10

GTM-P2G8KFN