This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
ExtremeWireless (WiNG)
Questions and discussions about WiNG devices
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Start a conversation

VX9000 license problem

Hello. In 2015, our company acquired a license for a virtual Wi-Fi controller VX-9000E. We have successfully used this product all this time, but unfortunately at the moment there was a problem. After the forced change of the configuration of the v...

dot11i timeout wing 5.8.5

Motorola G3/4 mobile phones will not authenticate with wlan, Dot11i timeout. If I set the wifi to be Open its fine, but will not connect using wpa-ccmp or wpa2-ccmp. I have changed the timeouts to the following (config-wlan-test)#wpa-wpa2 handshake ...

radio power setting over SNMP

I am trying to set the radio transmission power level over SNMP. I have an OID from the MIB that says I should be able to do this, but I cannot find a value that will be acceptable. The OID 1.3.6.1.4.1.388.50.1.3.16.2.6.1.3 - wingCfgProfIfRadio...

Mark by • New Contributor
  • 1754 Views
  • 2 replies
  • 0 kudos

Access Point Radio Faults on SNMP

I have a user who needs to see if there are any faults on the access point radios over SNMPv3. I have looked through the MIB OIDs, but I cannot find any sort of fault status provided for the radios of the access point. The only thing I can find is ...

Mark by • New Contributor
  • 1597 Views
  • 2 replies
  • 0 kudos

AP7161 Rado Antenna Configuration

Do you have to use all of the AP7161's radio antenna connectors? Are the radios configurable for 2x2 or 3x3 in the GUI or CLI or is it just a matter of not using certain antenna connectors on the AP?

GTM-P2G8KFN