cancel
Showing results for 
Search instead for 
Did you mean: 

Clients Can Not Access The Internet After SSID Change

Clients Can Not Access The Internet After SSID Change

rgmconsulting
New Contributor
We have the RFS4000 FPGA Ver 2.8. We recently changed the Guest Network SSID and now clients can not get out to the Internet. We get assigned all of the correct IP credentials, but we can not go out to the Internet after the change.
9 REPLIES 9

KK
New Contributor III
Bridging mode is configured as "tunnel". Does this config match with your NW diagram? if traffic should go directly to GW AP, this config should be "local".
"tunnel" is used when traffic must path through from AP to RFS4000.

local
client---AP---GW
tunnel
client---AP---RFS---GW

rgmconsulting
New Contributor
Too weird. Now it's giving me DHCP,,,but now can't get out. I am going to restart the unit.

rgmconsulting
New Contributor
Where can you find the client DHCP config?

rgmconsulting
New Contributor
How can we ensure that the RFS400 is handing out DHCP addresses to the clients?
GTM-P2G8KFN