Hi i have extreme wing v5.9 - adaptive networks ,, and i want block mac address for mobile ,, can i do it , if i can i wish you help me with this

[adeebh]

Hi i have extreme wing v5.9 - adaptive networks ,, and i want block mac address for mobile ,, can i do it , if i can i wish you help me with this

[Christoph_S]

Hello Adeeb,

Please contact GTAC so that we can provide you with the software that will allow you to access your APs via GUI.

How To: How to contact Extreme Networks Global Technical Assistance Center (GTAC) | Extreme Portal

If are already using WiNG-Man and getting the Flash icon when you run it, please follow this link for steps to resolve:

https://extremeportal.force.com/ExtrArticleDetail?an=000093487

Rgds,
------------------------------
Christoph S.
------------------------------

[Angelo_Cargnel]

Hi Adeeb,

you have to take care on the precedence (order) of your MAC address entries. The WiNG firmware will elaborate the MAC address rules in numerical order. So the AP will start with rule (precedence) 1 and check. First match is used and all subsequent rules are ignored.
In your case only the MAC addresses with precedence 1 and 2 are getting blocked as precedence 3 will allow all MAC addresses.
Therefore, please move the entry 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF to precedence 5000 (which is the last available).
All rules to block a specific MAC address should have precedence 1 - 4999.