Extreme Networks

Valter_Veiga · ‎10-30-2019

Hello,

How can I debug the following message ?

Oct 30 02:16:29 2019: %KERN-6-INFO: [401607.670569] athko_fill_wips_rxinfo: Error: unhandled value 0 for OFDM l_sig_rate.

9448a690941646789bae8653686489ce_bda243ed-ed94-4ad1-ba33-1e280e65339f.png

ckelly · ‎07-16-2020

Valter, I can’t say 100% based on the message itself:

athko_fill_wips_rxinfo: Error: unhandled value 0 for OFDM l_sig_rate

At this point, now that you’ve upgraded to 5.9.7 and are continuing to see the message, I would recommend reaching out to GTAC.

If you wanted to explore the possibility that this is a ‘opportunistic’ rate selection standard problem, try could try changing from opportunistic to standard and see if the messages continue.

View solution in original post

ckelly · ‎10-30-2019

I can’t find anything that specifically matches this error message in the subsequent release notes, but there are a 2-3 SPRs that are marked as fixed in 5.9.6 that sound like they MIGHT be related to this message. For now, at least as a test, I’d try upgrading to 5.9.6 and see if the message re-appears. If it does, I’d certainly recommend opening up a case with GTAC.

Valter_Veiga · ‎10-30-2019

Hi Chris,

AP7632 version 5.9.4.1-004R

ckelly · ‎10-30-2019

Valter,

What version of WiNG is running on this AP?

Extreme Networks

How to debug "Error: unhandled value 0 for OFDM l_sig_rate"

How to debug "Error: unhandled value 0 for OFDM l_sig_rate"