ā07-19-2020 02:45 PM
Hello,
I have seen that since Wing 7.3.1.1 there is something broken with network and Hyper-V. If I install Wing 7.3.1.1 or newer on a Hyper-V Host (testet Server 2012 R2 and Server 2019) the Interface is Down (seen in āShow interface ge1ā and āshow interface swtichboardā)
If I add in Hyper-V Manager an Legacy Network Adapter to the VM, I get a connected Interface. But using legacy virtual network adapter shouldnt be the solution, as it was working till Wing 7.2.x.
BTW Wing 7.3.1.0 doesnt even start on Hyper-V, but there is already a techdoc on this case.
Martin
Solved! Go to Solution.
ā07-19-2020 03:12 PM
Martin, this sounds like something that GTAC needs to reproduce and get into the system to be fixed. I donāt run Hyper-V in my lab so I canāt test this, but It doesnāt sound like youāre doing anything wrong here. Iād rcommend reaching out to GTAC.
ā04-03-2021 01:44 PM
Hello,
at least since 7.6.0 of VX9000 it is again working with the normal network adapte, you no longer have to use legacy network adapter. But again, nothing mentioned about in the release notes.
btw the releasenotes are strange, as there is already references a Wing 7.6.1.0
greetings
Martin
ā07-19-2020 04:38 PM
Hi Chris,
I will do it, just hoped that the problem is already known as there are already multiple versions out since 7.3.1.1.
Martin
ā07-19-2020 03:12 PM
Martin, this sounds like something that GTAC needs to reproduce and get into the system to be fixed. I donāt run Hyper-V in my lab so I canāt test this, but It doesnāt sound like youāre doing anything wrong here. Iād rcommend reaching out to GTAC.