Hi everyone
yesterday I upgrade the firmware for AP7632 in my controller RFS6000 but after upgrade mi AP, it showed a strange behavior, the leds of 2.4Ghz and 5Ghz were always blinked although the controller saw them, did not emit the configured WL...
Good morning,
there is a brief document that explains the differences and limitations using a VX9000 Controller compared with a solution using an NX appliance?
thank you,
Andrea
Hi,
I have a NX 5500 in VLAN 1 (192.168.1.1) and also have DHCP Server for vlan 10 configured in this controller. (Pool 10.10.10.2 - 10.10.10.5)
The controller is connected to a Switch in VLAN 1 (192.168.1.100) and L3 Vlan 10 (10.10.10.1) configu...
Currently I have some AP7532s set up to send traps to a trap receiver but I am getting a lot of unnecessary information (like client connection info, failed WPA authentications, etc). All I really want is a certain subset of traps, for example - the ...
