The APs are simply showing as connected to the controller.
The APs are also functioning using the current running-config that they have on them (might be a default config, I don’t know)
But until the firmware versions match, the controller intentionally will NOT push out an updated configuration file.
You can check to see if the controller has firmware for the AP.
In the GUI, go to the Operations tab at the top.
On the left, expand and highlight the controller
Look on a second toolbar for a tab called “Adopted Device Upgrade” and select it.
Then just below that, look for a button labeled “Device Image File” and select it
Over to the right, you will see a list of the various WING devices. Find your 2 AP models in that last.
If the Version column says “none”, then the controller doesn’t have the firmware. If it does, it will list the version (which SHOULD be the same version as the controller).
