The ap's ip address is incorrect on adoption status result.

[zlinuxboy]

I deploy 3 AP7522s, one of them is VC. here is the context of profile ap7522 default-ap7522

profile ap7522 default-ap7522
 use enterprise-ui
 ip name-server 221.176.88.95
 ip default-gateway 192.168.9.254
 autoinstall configuration
 autoinstall firmware
 use radius-server-policy WERSP
 crypto ikev1 policy ikev1-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ikev2 policy ikev2-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure
 crypto load-management
 crypto remote-vpn-client
 interface radio1
  data-rates gn
  wlan wing-hkxd bss 1 primary
 interface radio2
  wlan wing-hkxd bss 1 primary
 interface ge1
  switchport mode trunk
  switchport trunk allowed vlan 7-10
  switchport trunk native vlan 9
 interface vlan1
  ip address dhcp
  ip address zeroconf secondary
  ip dhcp client request options all
 interface pppoe1
 use firewall-policy default
 ntp server 0.pool.ntp.org
 use client-identity-group default
 virtual-controller auto
 virtual-controller management-interface ip address 192.168.9.140/24
 virtual-controller management-interface vlan 9
 rf-domain-manager capable
 logging on
 service pm sys-restart
 router ospf
 adoption-mode controller
!
rf-domain default
 timezone Asia/Shanghai
 country-code cn
 use smart-rf-policy hkxd
 use nsight-policy default
!
ap7522 74-67-F7-04-31-5C
 use profile default-ap7522
 use rf-domain default
 hostname ap7522-04315C
 interface vlan9
  ip address 192.168.9.143/24
!
ap7522 74-67-F7-04-4F-A8
 use profile default-ap7522
 use rf-domain default
 hostname cz3-ap46
!
ap7522 74-67-F7-04-4F-C4
 use profile default-ap7522
 use rf-domain default
 hostname ap7522-044FC4
!
ap7522 74-67-F7-04-53-20
 use profile default-ap7522
 use rf-domain default
 hostname ap7522-045320
 interface vlan9
  ip address 192.168.9.144/24
!
ap7522 74-67-F7-A1-AE-58
 use profile default-ap7522
 use rf-domain default
 hostname ap7522-A1AE58
 interface vlan9
  ip address 192.168.9.142/24
!
ap7522 74-67-F7-A2-DA-54
 use profile default-ap7522
 use rf-domain default
 hostname ap7522-A2DA54
 interface vlan9
  ip address 192.168.9.141/24
 no adoption-mode

the VC’s IP is 192.168.9.140

the 3 AP’s mac and IP are:

74-67-F7-04-31-5C : 192.168.9.143

74-67-F7-04-53-20 : 192.168.9.144

74-67-F7-A2-DA-54 : 192.168.9.141

but when `show adoption status` on vc

ap7522-04315C> show adoption status
Adoption Mode: CONTROLLER
--------------------------------------------------------------------------------------------------------------------------------
DEVICE-NAME       VERSION         CFG-STAT         MSGS ADOPTED-BY        LAST-ADOPTION                  UPTIME     IPv4-ADDRESS
--------------------------------------------------------------------------------------------------------------------------------
ap7522-045320     5.9.8.4-002R    configured       No   ap7522-04315C       0 days 00:18:52     0 days 00:21:01    192.168.9.140
ap7522-A2DA54     5.9.8.4-002R    configured       No   ap7522-04315C       0 days 00:30:23     0 days 15:23:04    192.168.9.141
---------------------------------------------------------------------------------------------------------------------------------

The ap7522-045320’s IP was change from 9.144 to 9.140(VC), what is wrong?

Question2:

I serial console to ap7522-045320, the hostname have a suffix ‘*’:

ap7522-045320*#

what does it mean?

[ckelly]

Okay...so the output from the VC, as you did, should look like your original posting - with the two APs listed.

Try running the neighbor command on each AP.  Each one should list the other 2 APs.

[zlinuxboy]

@Chris Kelly hold on man, I just update the last comment, pls check it out again.

[ckelly · Accepted solution]

Okay, that makes more sense then.

So in the neighbor output from 04315C, we can see its two neighbors.

So 04315C has a level-1 MINT link to each of these APs, as expected.

This is what I would expect to see.

[zlinuxboy]

Sorry, I have cut down the APs number from 6 to 3 , I should put the sentence ”I have 3 AP7522 and deploy as dynamic VC scene ”  at first of the last post.

here is the result of `show mint neighbors` on vc:

ap7522-04315C>show mint neighbors
2 mint neighbors of 75.04.31.5C:
75.04.53.20 (ap7522-045320) at level 1, best adjacency vlan-9
75.A2.DA.54 (ap7522-A2DA54) at level 1, best adjacency vlan-9

does this links number correct? It’s only 1 link to neighbors

ap7522-04315C>show mint links
1 mint links on 75.04.31.5C:
link vlan-9 at level 1, 2 adjacencies, DIS 75.04.53.20

based on you comment, isn’t it should be 2 links to the other neighbors?