01-13-2021 09:46 AM
We recently installed new vx9000 controller with AP310i in our office network. But Some of the clients unable to see the SSID broadcasted by AP while the next table client able to see the SSID & connect also. Can anyone help me what should be the issue?
Solved! Go to Solution.
01-13-2021 03:52 PM
In addition to what Stephan recommended, some older wireless clients can’t see SSIDs coming from WIFI 6 APs when 802.11ax is enabled. You can also test by disabling 802.11ax to see if the SSID will be visible to said clients
Here’s a link with instructions on enabling and disabling this parameter: https://extremeportal.force.com/ExtrArticleDetail?an=000085792
I hope this helps,
01-14-2021 04:51 AM
I tested with inSSIDer app on one of the working windows machine. Please find attached snap. It is showing that my SSID “ProgilityTech” using channel no. 11
01-13-2021 03:52 PM
In addition to what Stephan recommended, some older wireless clients can’t see SSIDs coming from WIFI 6 APs when 802.11ax is enabled. You can also test by disabling 802.11ax to see if the SSID will be visible to said clients
Here’s a link with instructions on enabling and disabling this parameter: https://extremeportal.force.com/ExtrArticleDetail?an=000085792
I hope this helps,
01-13-2021 03:07 PM
To configure your controller this two articles can help.
01-13-2021 03:02 PM
First of all you can check if the cause is the channel. You can install a programm on an working client to see the channels used by the AP. For example you can use the software inSSIDer it is still available in a free version.
If you have the used channels in the air and then you can take further steps if necessary.
In 2.4 GHz use channels 1 to 11 which are supported in all countries.
01-13-2021 02:44 PM
Thanks for the update. What is the default channel 2.4ghz band uses in AP310i? Because I have not made any changes in channel part. Can you please also share the process how I can change the channel on 2.4ghz band? Also what is the generally used channel in 2.4ghz band which support maximum type of end devices?