Network Architecture & Design - Page 43 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

What is the task TNetTask resonsible for?

Ive found some articles online, nothing of substance however. Only descriptions offered are very vauge like responsible for "switch ethernet traffic". And as a follow up, why would that task suddenly jump on devices from <5% to > 90% then locking up...

How to undo many configuration commands placed by mistake (unsave the configuration) in a EXOS.

Hello all to the community, As the title says, I am looking (if exists) a way to undo many configuration commands putted in the equipment. For example; I am configuring one equipment that later will be on service (that means it can not be re-boote...

LACP connected host --- two tier MLAG --- LACP connected host

Hi all, we have the following testsetup and i have a question regarding the different ping behavior as shown below... plz have a look and thank you in advance two tier MALG with two connected LACP Hosts/switches config as shown below.... ...

Problem with serial/ console port on Extreme x650

Dear all, I have at same time funny and serious problem with Extreme x650 switch. During the cleaning / "dust extraction" procedure with a compressed air one of our jumpers fell of from the inside of the x650 switch. The problem is that we lost con...

STP configuration for vmware ESXi

We have 2x BD8810's in an MLAG configuration, each with connections to VMWare ESXi 5.5 hosts. Each port to the ESXi host is tagged for multiple VLANs. What is the correct/recommended spanning tree configuration in this scenario? I've trawled the f...

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN