Network Architecture & Design
Questions and discussions about network architecture and design in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Need some help with EAPS rings design

Hi, I need some help with EAPS rings design. My network is working now as the next image shows. In the last months we have implemented some redundancy links but not yet with EAPS rings, and now I want to do it because we have many clients that we...

abde2d71b3724ff4b5ab1749a82aea65_RackMultipart20161031-82579-6qt0j8-Recent_EAPS_inline.jpg abde2d71b3724ff4b5ab1749a82aea65_RackMultipart20161031-38415-8igggb-Physical_Connection_inline.jpg abde2d71b3724ff4b5ab1749a82aea65_RackMultipart20161031-5763-pllrs9-EAPS_Planned_inline.jpg
Edison by New Contributor II
  • 696 Views
  • 6 replies
  • 0 kudos

Setting up a secondary IP address range

We are running out of IP's in our DHCP range and do not have 'room' in our IPv4 to enlarge the current scope. Can you setup a secondary IP range to use DHCP? Like so: interface vlan.0.100 ip address 10.10.1.0 255.255.255.0 primary ip address 10.10....

In Priority Flow Control, Pause for Priority greater than 3 Pauses everything just like normal ethernet frame control Pause

In Priority Flow Control, Pause for Priority greater than 3 Pauses everything just like normal ethernet frame control Pause. I want that lets say pause for priority 4 pauses only priorty 4 traffic but currently it pauses everything.I am using 670v an...

GTM-P2G8KFN