Network Architecture & Design
Questions and discussions about network architecture and design in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

BGP issue in Extreme X770 switch

What do the CLI mean? "configure bgp restart both" and "configure bgp as-display-format asplain"? There is a switch related issue in live network where we see fail-over from primary to secondary switch and back is not as working expected. Both swit...

Need some help with EAPS rings design

Hi, I need some help with EAPS rings design. My network is working now as the next image shows. In the last months we have implemented some redundancy links but not yet with EAPS rings, and now I want to do it because we have many clients that we...

abde2d71b3724ff4b5ab1749a82aea65_RackMultipart20161031-82579-6qt0j8-Recent_EAPS_inline.jpg abde2d71b3724ff4b5ab1749a82aea65_RackMultipart20161031-38415-8igggb-Physical_Connection_inline.jpg abde2d71b3724ff4b5ab1749a82aea65_RackMultipart20161031-5763-pllrs9-EAPS_Planned_inline.jpg
Edison by New Contributor II
  • 1338 Views
  • 6 replies
  • 0 kudos

Setting up a secondary IP address range

We are running out of IP's in our DHCP range and do not have 'room' in our IPv4 to enlarge the current scope. Can you setup a secondary IP range to use DHCP? Like so: interface vlan.0.100 ip address 10.10.1.0 255.255.255.0 primary ip address 10.10....

GTM-P2G8KFN