Hi everybody, As I was designing a SPBm architecture, a question occurred to me: in a such SPBm deployment (see below), is it possible to aggregate links ? I know its possible to aggregate IS-IS links between two same devices, but what’s about vIST/S...
Hi all I am confused how to configure the wlc and ap I have vlan 10 Mgmt on switch and I want to assign the same IP range to my wlc and all ap's example (10.11.10.1-10.11.10.50)I have vlan 13 data vlan that is IP range 10.11.13.1-10.11.13.250I haven'...
Hello Community ! I am wandering, if the following setup is possible to work: 1. We have a set (let's say 5) of typical /24 subnets. 2. There are separate DHCP pools defined for each subnet on single MS DHCP server. 3. We have a router configured fo...
Trying to find out a couple of questions. Can the K10 CLI be configured to mirror an entire vlan rather than mirroring each individual port? And are there resource limitations to mirroring most or all of the ports?
Hi,We are testing the XA access swithces to extend our fabric to remote sites, or for more advanced users who work from home who need more than just a VPN connection.Currently, we are running 8.3.1 on the two XA devices. One is at the office, it’s th...
