Network Architecture & Design - Page 67 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Why does flow-redirect not work?

configure snmp sysName "LAYER2-3_SWITCH" configure sys-recovery-level switch reset configure vlan default delete ports all configure vr VR-Default delete ports 1-5 configure vlan default delete ports 1-5 configure ...

How do I find out when new releases are released for AP's, switches, controllers, etc.

How do I find out when new releases are released for AP's, switches, controllers, etc.. Is there a page I have to monitor or an email that is sent out? Other products I work with send me an email when there is a new release for any of my products and...

X460 Series, BD 8800 G48Tc, BD 8800 10G4Xc How do I take a lot of time at reboot?

X460 Series, BD 8800 G48Tc, BD 8800 10G4Xc If you reboot during normal boot time, please tell me?

How to export the cfg file from x450-e to an x460 g2 switch

How to export the cfg file from x450-e to an x460 g2 switch

Extreme VRRP/ARP Issue - default gateway does not respond

Hi Hope someone can help. We have two Extreme core Blackdiamonds with various flavours of Extreme edge switches. Each core has two mlagg'd connections to edge stack. Recently the network was reconfigured to put routing on the cores, rather than a...

Top Kudoed Authors

User

Count

4

3

3

2

GTM-P2G8KFN