Network Architecture & Design - Page 69 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Configure extreme switch x440-24p-10G

Hi guys, I need some help. We bought a Extreme Summit X440-24p-10G switch and the idea is to create a vlan and to connect with existing LAN using cisco. I have no experience with XOS and I don ́t know how to set up. where can i get the configuratio...

Problem loading config on x460-48t

Hello I have a stack with 2 x460-48t switches. I have a third switch on the bench that I want to configure as a spare. All three of the switches have version 15.3.3.5 patch1-10. I'm trying to place the active configuration on the spare, but it alway...

Extreme Summit X440 to Cisco Catalyst C2960X Spanning tree

Hi. I need to add and connect a X440 stack to an on-production Cisco switch ring. Somebody can help me to know the right spanning tree configuration for the X440 to be compatible with the existing Cisco spanning tree configuration? This is the spanni...

MLAG ISC VRRP asymmetric routing possible

We are having a problem with the ISC between two x460s. VRRP is configured as ACTIVE/STANDBY. Everything looked fine initially during our tests as we only used ICMP. I configured separate "external" switches with IPs I could ping to test MLAG fail ov...

How to enable the advance edge licences in Summit X440

How to enable the advance edge licences in Summit X440 Appreciate for the help. Many thanks!

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN