In Enterasys B5 switch, we have arp inspection and dhcp snooping protocols on. We got IP telephone with Poe. Sometimes these IP telephones can not register to PBX server. These ports are not in trust mode. Can this affect IP telephones? Thanks, Bes...
Hello, I have two stacks, and i would like to build a MLAG pair Each stack is composed of a Summit X670V (slot 1) and a X670 (slot 2) To make the ISC link, i want to use a sharing of two links, and i was wondering if there is any recommandation abou...
Doing a simple connection (ethernet cable) at home between a PC and server. I get 'destination host unreachable' - I have configured both Ethernet connections with static IP - both are on the same subnet. I have the sharkwire trace output of the p...
I have successfully enabled a x460-g2 switch as NTP server, and clients can receive time from them. BUT: It appears that only clients from directly connected VLANs are allowed by the NTP service, for all others I have to add an entry via: configure ...
Hello everyone, I'd like to know the ARP and MAC table limits on both the x440 and x460G2, and I wanted to know if there's a per-VLAN limit for MAC addresses or if it's more of a 'global' limit. Thanks! Germán.
