Network Architecture & Design - Page 72 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

get 'destination host unreachable' with a simple connection (ethernet cable) between a PC and server

Doing a simple connection (ethernet cable) at home between a PC and server. I get 'destination host unreachable' - I have configured both Ethernet connections with static IP - both are on the same subnet. I have the sharkwire trace output of the p...

XOS 16.1.2 - How to disable the NTP restrict-list?

I have successfully enabled a x460-g2 switch as NTP server, and clients can receive time from them. BUT: It appears that only clients from directly connected VLANs are allowed by the NTP service, for all others I have to add an entry via: configure ...

What are the ARP and MAC table limits on x440 and x460G2?

Hello everyone, I'd like to know the ARP and MAC table limits on both the x440 and x460G2, and I wanted to know if there's a per-VLAN limit for MAC addresses or if it's more of a 'global' limit. Thanks! Germán.

Network Loop through VoIP Phone

Last week we have a network loop caused by a VoIP Phone - mitel 6865i. Someone plugin both ports of the phone into the wall / switch. Because the 2 port switch in the phone forward data frames but filter out BDPUs frames, so Spanning Tree have no cha...

untagged vlan configuration on securestack b2

Hello Extreme Forum, I want to create 2 untagged VLANs on an SecureStack B2. The ports 1-32 + 47-48 should be used by the office net. In this case I use VLAN 1. Everything works fine, I can connect to the other stations. Ports 33-46 should be used i...

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN